The Hp Deskjet 2652 Printer Setup

HP Deskjet 2652 is an All-in-One printer that can print, copy, and scan. This printer also supports wireless connectivity and so you can connect any wireless device to this printer.

How Do I Sync How to send automatic emails in outlook 2016

The HP Deskjet 2652 setup is quite simple and easy if you follow these steps.

Step 1:Unpack the printer and then take out the box contents such as power cord, user’s guide, and ink cartridges.

Step 2:Remove all the protective tapes from the printer and make sure to recycle them.

Step 3:Connect the printer to an electrical outlet using the supplied power cord and press the Power button to turn on the printer.

Step 4:Lift/open the ink cartridge access door and wait until the carriage moves to an idle position.

Step 5:Unpack the ink cartridges and remove the protective seals from them.

Step 6:Make sure not to touch the copper-colored parts of the ink cartridges because it may affect the print quality.

Step 7:Install the color ink cartridge into the left side slot and the black ink cartridge into the right-side slot.

Step 8:Close the ink cartridge access door after installing the ink cartridges.

Step 9:Next, raise the paper input tray and slide the paper width guide towards the left.

Step 10:Fan a stack of plain paper and load it into the input tray.

Step 11:Adjust the loaded paper by sliding the paper width guide towards the left.

Step 12:Make sure not to force the edges of the loaded paper with the paper width guide.

Step 13:Lower the output tray and extend the paper support.

Step 14:Install the printer software on your computer using the CD-ROM that you received along with the HP Deskjet 2652 printer and verify the printer functionality by printing a test page.

Step 15:You can also copy or scan to check the printer functionality.

Step 16:To print any documents, ensure the connectivity between your printer and the computer.

Step 17:On your computer, open the print application and select the Print option from the File menu.

Step 18:Choose your printer’s name from the drop-down menu and click the Properties button to select the required print settings.

Step 19:Finally, click OK  Print.

Step 20:Now, your document will be printed on the HP Deskjet 2652 printer.

Step 21:To scan your document, place it on the printer’s scanner glass and open the HP printer software on your computer.

Step 22:Select Scan  Scan a Document or Photo.

Step 23:Choose the required scan settings and click the Scan button.

Step 24:To make copies, place the original document on the scanner glass.

Step 25:Place enough paper in the input tray and navigate to the printer’s control panel.

Step 26:Press the Start Copy Black or Start Copy Color button to make copies.

Step 27:Press the Copy button multiple times to increase the number of copies.